17 - 11 - 2017

Triggers library

Block TriggerRS

The block represents the classic electronic RS trigger:

http://en.wikipedia.org/wiki/Flip-flop_(electronics)

It has Set input, the hight front in this input sets the output Q to hight level. Hight front in Reset input clears the output Q to low level. Output NotQ is negative value of output Q. If the input EnableOuts is connected and is in low level, the the both outputs of block are in low level too.

 

Block TriggerT

The block represents the classic electronic T flip-flop trigger:

Every hight front in input T flips the output Q from low level to high level and vice versa. This is the reason because we can use this block as digital devider by factor 2. Hight front in Reset input clears the output Q to low level. Output NotQ is negative value of output Q.

 

Block TriggerD

The block represents the classic electronic D flip-flop trigger:

Hight front in input SetD will set the output Q with the value of inout D. Hight front in Reset input clears the output Q to low level. Output NotQ is negative value of output Q.

 

Block MemoryUni

The block can remember an information from different kind of signlas. The user can add many twin-sets of inputs/outputs using parameter InOut. When the input Set becomes to hight level, the values of inputs will appear to corresponding outputs of the block and will be remembered. Hight level of input Reset clears all the outputs.

Parameters:
InOut – allows to add twin inputs/outputs;